How To Hook Up A Honda Generator To Your House. There are 3 different types of transfer switches to choose from, which are; At the breaker box turn off all the breakers.
Take the unit outside that is a minimum of 10 feet away from openings. Run one gen cord from the generator and connect multiple appliances. Attach generator extension cord to the generator with an inward push and gentle clockwise turn.
Table of Contents
Automatic Transfer Switch, Manual Transfer Sub Panel And A Breaker Interlock Panel.
Plug it in, select which voltage you want (if you can), and do the same turn that you did with the other end and the receptacle. Turn off your main power. Plug your attachment cable into your generator.
How To Hook Up A Honda Generator To Your House.the Most Popular Way To Hook Up A Generator To Your House Is Via A Transfer Switch.
How to hook up a generator to your house without a transfer switch. Locate the access point and drill a hole in the wall of your house. Transfer switches connect the generator to the transfer switch using a gen cord.
Run Many Extension Cords From External To Hook Up To Electrical Devices.
Additionally, make sure that you drill the hole in a location that will keep the generator far from you. Locate it several feet away from the access hole you have drilled. You’ll also want to consider how to connect the generator to your home safely.
This Hole Should Be As Far Away From The Generator As Possible, And Large Enough To Accommodate Your Incoming Wires.
Mount the power inlet to the exterior of your house. There are 3 different types of transfer switches to choose from, which are; With 3 or 6 circuits hooked up to a generator that only supports 1500w continuous, it is very easy to overload generator.
Start Generator And Ensure Normal Operating Speed.
Attach generator extension cord to the generator with an inward push and gentle clockwise turn. At the breaker box turn off all the breakers. When powering your home, the generator is only half of the equation.